I have a separate motor oil reservoir. Where is the oil and gas mixed? Specifically what part of the bike is it mixed in and is it a liquid or gas at the mixing point?
On this type engine that has an oil tank the oil passes through an oil injection pump where it is metered into a port usually at the base of the carburetor where the carburetor mounts to the engine.
This is a very generic description.
The Law states I can have a 1000 Watt motor. The Law says I can have a 1/3 hp engine. The law says nothing about how I charge the motor though. The 2.4 hp engine on the generator will fit the bike trailer I've got nicely. It makes less fumes than the
get er done
Just received a Engine: 49cc Single Cylinder, air cooling, two stroke pocket bike. Ya I know they are junk. I can't start the thing. It came with no manual, no foot rests, no stand.
I mixed Petrol/2 Cycle 1:25 engine oil and put in ...turned
First off the 49cc 2 stroke engine is not junk.
2nd dont pull it slowly
3rf the on off is for your power kill.
check the spark plug and fuel lines.
when i turn off my pull start 50cc 2 stroke pocket bike engine. does the piston allways stop in the same simulare position and what position that would be? or does it just end up in random locations? ( like up near the cobustion chamber or down and whatnot). It stops in a random position ... unless it happens to be coming up on compression, which acts like a spring and where it stops then depends on piston speed and position at the time the ignition is turned off.
It sounds more like you have
Motorized chopper bike, with parts from a Yamaha scooter from the 70's 80cc ebay motor Bike stalls at lower speeds due to the gearing, its ...
